Tủ đựng đĩa mini cho ngôi nhà búp bê

For the turntable knobs and the central pin I used a piece of 1.75mm filament, so if you print at 1:1 scale you don't need to print the knob file.

But if you choose to change the print scale then you can print the knob file.

Printing and assembling the turntable takes a lot of patience, but if I can do it, then you can all do it

Attached you can find a file in PDF format that contains some covers for vinyl records, which you can cut out and paste to the “record cover” file

Supports required for cabinet only

Layer height 0.2mm

Nozzle 0.4mm