
Đèn lồng phong cách Nhật Bản mini (chiều cao khoảng 110mm)
- Downloads
- 8
- Likes
- 4
- Views
- 49
- Remixes
- 0
- Comments
- 0
Files 7 3.8 MB
- lantern_body_1775937405.3mf3MF · 431.7 KB
- lantern_text_sample_1775937408.3mf3MF · 103.1 KB
- lantern_jig_set_1775937409.3mf3MF · 229.5 KB
- lantern_body_1775937411.stlSTL · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #275524
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Public Domain
Description
Easily attach 3D printed text to curved surfaces!
This model is designed to be illuminated by placing a light inside.
You can attach custom text or graphics by printing thin PLA parts (0.5mm) and forming them to the curved surface using the included jig.
Create your own original lantern!
For a detailed assembly process, check my Instagram.
---
■ Assembly Instructions
1. Print the lantern body, text parts, and jig
2. Place the text parts into the jig
3. Heat them using a hair dryer
4. Once softened, clamp them with the jig to form the curve
5. Let them cool, then attach to the lantern body
(Adhesive for acrylic/plastic is recommended)
---
■ Materials
- Lantern body: PLA
- Text parts: PLA (0.5mm thickness)
- Jig (male & female set): ABS or ASA
---
■ Print Settings
- Ironing recommended for top surface (text parts)
- Brim recommended for jig
---
■ Lighting Options (2 types)
① LED candle light (approx. 37mm diameter)
② USB light + USB extension cable with switch
Both options can be easily found online.
Notes:
- LED candle light is not very bright
- White lanterns allow light to pass through better than red ones
- USB light provides brighter and cleaner illumination
---
■ Important Notes
- The included text sample uses a free Japanese font ("Kokutetsu-style font").
- Commercial use of this font may be restricted depending on its license.
- If you plan to use this model commercially, please create your own text using a properly licensed font.
- This model is designed for use with LED lights only. Do NOT use real flame.
- Print results may vary depending on your printer and settings.
---
※ Use LED light only. Do NOT use real flame.
Print spec
- Formats
- 3mfstl
- Model files
- 7
- Total size
- 3.8 MB
- Largest file
- 1.8 MB












