Hueforge Hange Cumslut

Project: Hange Cum.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 151.59x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

(Most Black, White and Gray filaments should give an okay result, but for the best result use filaments listed below)
PLA BambuLab Matte Charcoal Transmission Distance: 0.6 (Black)
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 (Gray)
PLA BambuLab Matte Ivory White Transmission Distance: 3.5 (White)
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Ash Gray
At layer #21 (1.76mm) swap to Ivory White for the rest.