Skip to main content
F3D
Mô hình Hueforge Himeno Futanari 1

1 image

Mỹ Thuật

Mô hình Hueforge Himeno Futanari

By ProjectNorway

Downloads
289
Likes
31
Views
4,205

Files 2 17.8 MB

  • Himeno_Futanari_Matte_Front_185x200_1776543736.3mf3MF · 17.8 MB
  • Himeno_Futanari_Matte_describe_1776543738.txtTXT · 633 B

Make a variant with AI

Build another version of this model.

Open Studio

Description

Project: Himeno Futanari Matte.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 184.58x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Ash Gray
At layer #14 (1.2mm) swap to Ivory White for the rest.

Read more Show less

Print spec

Formats
3mftxt
Model files
2
Total size
17.8 MB
Largest file
17.8 MB

0 comments

See all