Chú Thỏ Leo Chậu Cây Trang Trí

My wife bought ceramic ornaments like these for our daughters to paint.  Unfortunately, they didn't grip the rim of the pot very well and were very fragile.  I decided to see if I could make something better.

Be gentle, this is my first attempt at modeling something like this.

I printed this with 0.2mm layers, 10% infill and buildplate-touching supports set to 73 degrees. Go slow (15mm/s) on the walls and use max cooling after the first layer due to the steep initial overhangs.  I used Overture PLA+.