Skip to main content
F3D
Trang trí Trứng Phục sinh phong cách Hiện đại 1

3 images

Đồ Gia Dụng

Trang trí Trứng Phục sinh phong cách Hiện đại

By ChrisAeroEngineering

Downloads
363
Likes
60
Views
1,397

Files 8 4.4 MB

  • EasterEgg_Style_A_1783911264.3mf3MF · 291.8 KB
  • EasterEgg_Style_B_1783911266.3mf3MF · 291.8 KB
  • EasterEgg_Style_C_1783911269.3mf3MF · 274.4 KB
  • EasterEgg_small_1783911270.stlSTL · 669.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Modern easter egg decoration.

There are different styles to choose from and a small version that should print better for smaller sizes. The eggs of styles A and B have a height of 60mm at 100%, style C comes in at 50mm and the small version has a height of 40mm at 100%.

The walls of the model run parallel to eachother, which improves scalability and printability at different scales (since the number of perimeters / the wall thickness does not change over the height of the model). So you can just scale the model to your liking in the slicer. There are smaller and larger versions with a different number of notches. I would not recommend scaling much smaller (like 20% of the original size) than the small version. Scaling up should not present any problems on the printability of the model.

Scaling up the small version will provide thicker walls compared to the medium/standard verisons at the same height, if this is preferable for you. 

Printing:

  • 2 perimeter
  • 10-15% infill
  • 0.2mm layer height (I would recommend changing the layer height at the top to improve the look of the tip - I changed it to 0.08mm above the structured wall)

Happy Easter!

Read more Show less

Print spec

Formats
3mfstepstl
Model files
8
Total size
4.4 MB
Largest file
835.2 KB

0 comments

See all