Slinger - Monster Hunter World (Phụ kiện Cosplay)

Monster Hunter World slinger. The straps are on the large side at the moment until I figure out what armor to make and can shorten them properly. Because many of the armors also change the slinger arms they are designed to be interchangeable and might also end up designing a new set if my chosen armor also changes them from the default look.

Fusion360 Link (Body): https://a360.co/2WXfLfw

Fusion360 Link (Arms): https://a360.co/3htrOci

Materials:

Magnets. (@kjmagnetics):

• 20 x D3H1
• 5 x D81
• 2 x B882-N52 

Straps. (@strapworks):

• 1 x Solid Color Utility Polyester Webbing 3/4" (black)
• 1 x Flat Nylon Webbing 2 Inch (black) .
• 2 x Single Adjust Side Release Buckles 3/4"

Screws: (@boltdepot):

• 10 x #4-40 x 5/8"
• 16 x #4-40 x 3/8"
• 4 x #2-56 x 5/8 "
• 4 x #2-56 Hex nuts

Updated: 12/2020

Added front handle to allow for more stability while strapped to the arm. This section is part of the game slinger but I originally missed it when I first designed it.

Post-Printing

Top View - Expanded

Top View - Collapsed

Rope Craft Store

Initial Magnet and Screw Placement

D81 Magnet to allow for quick assembly and disassembly of the slinger arms.

Rail with D3H1 magnets

Finished Shots ==============

Collapsed View

Expanded View

Handle Update =============

Custom Section

Category: 3D Printing