Multiboard - Giá treo thước gấp

If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated!

I'll be looking forward to interact with you guys and our shared passion for making! :)

https://www.buymeacoffee.com/flobi
________________________________________________________________________________________________________________

Couldn't find any folding ruler holders for the Multiboard system. Or, atleast to my liking. So i came up with my own spin on some very simple yet effective designs! :) 

There is a version with a “built-in” snap and a version that's using push fit rods, which makes it very easy to install on the Multiboard Tiles. I decided to make the snap edition with 1 snap. 2 snaps seems to a bit overkill i think. I've printed 6 holders and they are holding 3x folding rulers.

Pros:
- Print-in-place with NO supports!
- Can be re-located indefinitely

Cons:
- The snap edition is not as strong of a mount as I'd like, but plenty for a folding ruler

________________________________________________________________________________________________________________

Parts list:
1x Folding Ruler Holder (Snap or Push Fit Edition)

Print instructions:

All files prints very nicely on the Ender V3 KE.
The only things i changed in the print settings are the following:

- Infill Pattern
- Walls/Wall Line Count
- Build Plate Adhesion/Brim
- Seam Allignment/Z-Seam Allignment

Follow the below matrix to achieve the same great results as i got:
 

Parts

Quality

Support

Infill

Brim

Walls/Top L/Bott. L

Folding Ruler Holder

0.2mm

No

15% Gyroid

No

3/4/4