Đế Gridfinity 5x5 dạng Stack, tối ưu cho in đơn vật liệu

Remix of Bảng đỡ Gridfinity 5x5 gắn vít nhẹ và hiệu quả By Ofek256_43445

By MaxD_3091779

Downloads: 233
Likes: 19
Views: 1,095
Remixes: 0
Comments: 0

Download all (.zip)· 5 files · 33.7 MB· 33.7 MB

Files 5 33.7 MB

grid_stack_assem_4_v3_1776841589.3mf3MF · 894.5 KB
5x5_baseplate_single_layer_w._support_lines_1776841590.stepSTEP · 4.5 MB
grid_stack_assem_4_high_1776841591.stepSTEP · 18.6 MB
grid_stack_assem_4_v3_1776841595.stlSTL · 4.7 MB
grid_stack_assem_4_v3_0.4n_0.25mm_PLA_COREONE_3h57m_1776841597.bgcodeBGCODE · 5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #272432
Category: DIY
Published: 04/22/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: gridfinity
printinplace
gridfinitybaseplate
5x5gridfinity

Show more tags Show fewer tags

Description

Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each corner to help with corners lifting/warping. Cut towers off post print then separate layers. sometimes a utility blade helps to get it started. Included step files in the attachments for anyone who wants to add more layers to the stack. I printed this on my Prusa Core One (210x250 plate) with .25mm layer height in Bambu generic PLA, 215C. DO NOT RUN SUPPORTS! Support lines are modeled for .25mm layer height so .28mm would make them disappear in the slicer. .25mm and under should work fine.