Canopy Moonlight 2 vật liệu cho Pavo 20 Pro

Remix of Canopy 2 vật liệu dành cho Walksnail trên Pavo 20 Pro By RoccoDiVerdi_3151181

By RoccoDiVerdi_3151181

Downloads: 124
Likes: 10
Views: 753
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 4.6 MB· 4.6 MB

Files 4 4.6 MB

walksnail_moonlight_bumper_1778876704.stlSTL · 354.9 KB
walksnail_moonlight_canopy_1778876706.stlSTL · 1.8 MB
walksnail_moonlight_nd_filter_bumper_1778876707.stlSTL · 47.7 KB
thickerCanopy_1778876709.zipZIP · 2.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #271014
Category: DIY
Published: 05/16/2026
License: Creative Commons — Public Domain
Tags: walksnail
moonlight
pavo20
pavo20pro

Show more tags Show fewer tags

Description

The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine.

Use 4x m2 heat set inserts (2 mm tall) for the mounting holes.

The TPU bumper is printed with 95A hardness TPU, and must be bent considerably to fit into place. The camera screws go through the TPU, so no glue is required.

The nd filter bumper is also printed out of TPU. It fits around the cylindrical portion of the filter and in front of the rest of the bumper.

note I added a thicker version with extra antenna support per the first comment. Those models are in the .zip file.