MMU3 cho các linh kiện CORE One L

Description:

All parts required to convert your existing Original Prusa MMU3 (for MK4S or CORE One / CORE One+) into the Original Prusa MMU3 for CORE One L.

This set includes everything needed to upgrade your current MMU3 unit to be compatible with the CORE One L.

There are two available conversion options:

• Lite version - without enclosure

• Enclosed version - with top cover

Please note that some components are not suitable for 3D printing. STEP or DXF files are provided for these parts to enable alternative manufacturing methods.

Before you begin printing, carefully read the included instructions. Additional hardware components are required for the conversion and must be sourced separately.  

Print instructions:

Download the latest PrusaSlicer and use the following settings*:

• Print settings: 0.20mm BALANCED

• Filament: PETG (tested on Prusament)

• 15% Grid infill

* Note that print settings are recommended, but you can experiment with your own. 

The prints were tested on the Prusa CORE One L.

 Required fasteners and parts:

Buffer

M3x8 screw

12 pcs

M3x30 screw

22 pcs

Magnet 20x6x2

18 pcs

M3nS nut

22 pcs

Buffer wheels - can be used from your previous mod

Bearing 693.2rs

5 pcs

Shaft 2,9x8,5

5 pcs

M3n nut

15 pcs

M3x6 screw

25 pcs

Lite version

M3x10rT screw

4 pcs

Enclosed version

M3x10rT screw

12 pcs

O-ring 2,8x1,2

2 pcs

Nylon rivet

4 pcs

PTFE tubes

PTFE 4x2,5x710

5 pcs

PTFE 4x2,5x940

5 pcs

PTFE 4x2,2x460

1 pc

Nextruder modification - can be used from your previous mod

Nextruder nozzle (0.4 mm normal flow)

1 pc

Magnet 3x1mm

1 pc

M3nN nut

2 pcs

M3x22 screw

2 pcs

M3x35

2 pcs

O-ring 24,5x1,5

1 pc

Before using the MMU3, set the correct PTFE tube length (460 mm) in the printer menu under Settings → Hardware → MMU → Front PTFE Length. This setting is available in firmware version 6.3.3 or newer.

If you do not own an MMU3 unit, we recommend ordering the CORE One+ Lite version from our e-shop. 

Please refer to this article for assembly instructions.

Required tools:

• T10 Allen key

• 2,5mm Allen key