
Mô hình Frostmourne đã được cắt nhỏ
- Downloads
- 5
- Likes
- 3
- Views
- 76
- Remixes
- 0
- Comments
- 0
Files 22 1.9 MB
- tip_2_1776778031.stlSTL · 19.1 KB
- frostmourne_cut_up_1776778032.stlSTL · 638.9 KB
- body_1776778034.stlSTL · 55.1 KB
- frostmourne_1776778035.scadSCAD · 1.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #268853
- Category
- Cosplay
- Published
Description
I wanted a full scale model, but my print bed isn't nearly big enough. Hooray for Puzzlecut!
The cuts aren't NEARLY that large; I set them to -0.4 to illustrate the cut locations. In the .scad and .stl file they're set to -0.01, but that's of course configurable. I found -0.05 to be a bit loose for friction welding.
I included HotCheeseSoup's Frostmourne.stl file. If you intend on editing the scad file, you'll need to edit the path/to/frostmourne string at the top.
Further, the model's_REALLY_ small. You'll want to scale appropriately. 10x results in a ~1.4m sword.
I've finally gotten around to uploading the .stls I used for anyone that doesn't want to go to the trouble of breaking the piece apart themselves. The pommel is...difficult. You'll want to print both parts together, on their flat side, and then join them while they're still warm from the bed.
tags: sword knife openscad world_of_warcraft wow
Print Settings
Printer:
Printrbot Play
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm (but 0.1mm would be better)
Infill:
20 (increase to 40+ for extra strength)
Notes:
Try to print the parts pointing up. It helps tremendously.
Category: Props
Print spec
- Formats
- scadstl
- Model files
- 22
- Total size
- 1.9 MB
- Largest file
- 638.9 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-


