Giá đỡ Raspberry Pi Zero gọn gàng cho 2-6 thiết bị

This shelf allows you to stack neatly between 2 and 6 Raspberry Pi Zeros encased in a minimalist case. I'm using the Zebra Zero Heatsink Case – Raspberry Pi Zero/Zero W/Zero 2 from C4Labs - https://www.c4labs.com/product/zero-heatsink-case-raspberry-pi-zero-w/ but any similar case with just a top and bottom should also work. Clearance may be an issue otherwise.

Note: There is no access to the GPIO pins when using this case. It is meant for running your Pi Zeros in a headless mode.

Choose from 2 high-level options:

• Slots for power and HDMI access
• Slots for power only access

The shelf prints in a single body. Files include 2, 3, 4, 5 and 6 shelf versions.

Measurements:

With the case on the Pi Zero, it measures 2.75" wide x 1.25" deep x 9/16" high. A tolerance of 0.08" has been added to allow a little clearance on all sides within each shelf slot.

The outer wall and shelf thickness is 0.05"

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

20%

Filament: Comgrow PLA Black

Notes:

Printing with supports may add up to an additional hour to the print time. They may or may not be necessary for your print. Be cautious when removing them.

Category: Computer