Logo 2F (Hueforge)

Logo #2

I am an avid gamer. I thought I would make a collection of the different game company logos.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d IMAGE Conversion #080a0d Transmission Distance: 0.3

#4aba81 PLA eSun Green Transmission Distance: 2.5

#ffff95 PLA Snapmaker Yellow Transmission Distance: 5.1

#ffffff PLA Comgrow White Transmission Distance: 6.2

This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!

Swap Instructions:

Start with #080a0d

At layer #10 (0.88mm) swap to Green

At layer #17 (1.44mm) swap to Yellow

At layer #25 (2.08mm) swap to White for the rest.