Đế nâng (Riser) cho bộ điều khiển SuperLongBoard

The riser geometry fits into the slot originally occupied by the plexiglass lid. It’s fastened to the SLB with a 4mm socket head cap screw and flat washer.  The screw can be tightened by inserting a 3mm allen wrench through the 4mm heat-set threaded insert in the riser. The plexiglass lid and its thumb screw are relocated to the top of the riser. The thumb screw threads into the heat-set insert.  You can replace the heat-set insert by modifying the STEP file to have a drop-in cavity for a standard 4mm hex nut. 

I printed the riser using:

Black PETG, 0.4 nozzle, 0.2 layer height, 15% gyroid fill, 3 walls, traditional supports (not tree) are required.