Phiên bản V2! Plifter - Robot chiến đấu 1lb hạng Antweight

Updated V2!

I've finally uploaded some long overdue changes to make assembly easier and make the robot more durable than before! Some Patch notes:

• Updated design to use all M3 bolts and nuts included in the linked BOM. (no more fiddly heatsets!)
• Redesigned upright structure to reduce gears slipping of vertical hits.
• New servo gear mates more securely and is easier to assemble.
• New switch placement allows drop-in replacement with Fingertech screw switch if desired.
• New printed wheel hubs transfer less energy to motors on hit. (Fewer broken gearboxes!)
• New fork designs.

Here is the list of parts needed:

• 4 x N10 1650RPM Motors (https://turnabot.com/products/high-power-n10?variant=40166099910721)
• 1 x Malenki Nano Combo Receiver and ESC (https://turnabot.com/products/malenki-nano-integrated-6-channel-triple-electronic-speed-controller-receiver-combo)
• 1 x Kingmax KM1203MD Servo (https://turnabot.com/products/kingmax-km1203md)
• 1 x 2S 300mAh LiPo Battery (https://turnabot.com/products/turnabot-300mah-2s-65c-lipo-battery)
• 1 x Fingertech Charge Jack (https://itgresa.com/product/switch-and-charge-jack/)
• 4 x Solarbotics tires (https://www.solarbotics.com/product/rt28x13)
• 4 x 3mm Shaft Collars (https://www.amazon.com/dp/B0CQ2NR3FC)
• Various Length M3 Bolts 4mm - 40mm (https://www.amazon.com/dp/B09YPV26KK/)
• 5 x Small zip ties (https://www.amazon.com/gp/product/B09PJ8L58G/)

If you are new to combat robotics or hobby RC in general, you will also need a compatible AFHDS2A transmitter like the Flysky FS-i6.

Some armor files need to be mirrored while slicing to get both sides.

TODO:

Add specific print profiles. For now, assume all the black parts are printed all walls Duramic PLA+, green/pink parts are Overture Super PLA at generic-ish 4 walls 15% gyroid.

Add assembly instructions. I filmed my last assembly, but it needs editing. Possibly a set of Cadasio instructions.

Make SCAR Kit compatible chassis for their slightly larger Lego wheels.