Skip to main content
F3D
Nam châm tủ lạnh đơn giản 1

4 images

Đồ Gia Dụng

Nam châm tủ lạnh đơn giản

By Repoholy

Downloads
4
Likes
1
Views
76

Files 18 503 KB

  • 01_heart-8x2hole_1774506417.stlSTL · 25.7 KB
  • 02_bubble-8x2hole_1774506418.stlSTL · 44.2 KB
  • 03_speech-8x2hole_1774506419.stlSTL · 30.2 KB
  • 04_square-8x2hole_1774506420.stlSTL · 27.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I needed some child-safe-ish magnets, so I desinged 9 different shapes, in which you can insert a magnet during printing, so the magnet is encapsulated in the print with no way of getting out.

Dimensions

Magnets needed: Round 8 mm diameter, 2 mm height, one magnet for each shape

Shapes: Every shape is 40 mm wide. I'm afraid that the bubble and cloud shape could be a choking hazard or swallowing hazard for children under 3 years old, the rest of the shapes seem safe to me, but be careful.

Use any filament you like, I prefer PLA. In slicer add a print pause right between the last layer with magnet hole and the first layer going over the hole. Insert the magnet in the hole when the printer pauses - it fits nicely. It's very satisfying 😊 Magnetic sheet will catch it, don't worry 😊

If you want to use different size of magnet, choose models without holes and create one yourself:

  • For 8x2 magnet I used round hole with 8.2 mm diameter and 2.1 mm height. I put the holes 1 mm above the base of the shape.

  • So for example for 6x2 magnet I would try 6.2 mm x 2.1 mm hole.

  • If you want to use a magnet with different height, I would also consider to change height of the shape, so the final magnet is strong enough or has enough plastic material above and below the magnet.

Let me know how your magnets went and happy printing!

Read more Show less

Print spec

Formats
stl
Model files
18
Total size
503 KB
Largest file
54.1 KB

0 comments

See all