
Thân trên phong cách Frame Arms cho Carbon 13 Type F
Remix of Mô hình CARBON 13 Type F phiên bản dày dặn hơn By Ultrafast_3018963
- Downloads
- 204
- Likes
- 41
- Views
- 1,257
- Remixes
- 1
- Comments
- 0
Files 14 15.2 MB
- Runners_1774493229.stlSTL · 1.2 MB
- Upper_Torso_1774493230.stlSTL · 682.7 KB
- Upper_Connector_1774493231.stlSTL · 229.1 KB
- Upper_Belly_1774493232.stlSTL · 423.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #263473
- Category
- Figures & Action Figures
- Published
Description
The new Carbon 13 figure is great, but the exposed connector in the torso was bothering me in an otherwise completelly smooth figure. So I decided to adapt the torso from the Frame Arms compatible kit I had published previously, with several improvements to printability and toughness.
My version retains most of the articulation of the original torso, and has the same as the Frame Arms kit, but now the belly joints are hidden inside the body, creating a much smoother and realistic figure.
One of the images show how it's put together, the trickiest part is the pelvis, as you have to snap the groin joint to the lower connector and the pelvis to the lower belly at the same time.
The two belly parts must be joined with two pieces of filament, a dab of glue is recomended but not required. there's a version without the cut on the optonal parts, that one should be used with the optional pelvis and the legs connector mounted underside.
Print spec
- Formats
- stl
- Model files
- 14
- Total size
- 15.2 MB
- Largest file
- 7.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-



