Skip to main content
F3D
Miếng đệm bắt baga Basil Portland (M3-M6) 1

2 images

Thể Thao & Ngoài Trời

Miếng đệm bắt baga Basil Portland (M3-M6)

By tomcraft194_930658

Downloads
1
Likes
2
Views
91

Files 5 4.4 MB

  • Portland_Spacer-M6_1774418312.stlSTL · 1.2 MB
  • Portland_Spacer-M5_1774418314.stlSTL · 826.5 KB
  • Portland_Spacer-M4_1774418315.stlSTL · 1.2 MB
  • Portland_Spacer-M3_1774418317.stlSTL · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Model This spacer allows you to mount the Basil Portland front rack directly to your bike fork's threaded eyelets instead of using the wheel axle. It is compatible with M3, M4, M5, or M6 hardware, depending on your fork's specifications.

Print Settings

  • Material: PETG, ABS, or ASA (Required for UV resistance and durability)

  • Layer Height: 0.2mm

  • Infill: 30% (Grid or Gyroid)

  • Walls/Perimeters: 3-4 (For structural integrity around the bolt)

  • Supports: Not needed

Hardware / Assembly

  • Bolt: 1x M3, M4, M5, or M6 (Length depends on your fork/spacer thickness)

  • Washer: Recommended for both sides to distribute pressure.

  • Instructions: Slide the bolt through the rack mount and the printed spacer, then thread directly into the fork eyelet. Do not over-tighten if using plastic spacers.

Read more Show less

Print spec

Formats
f3dstl
Model files
5
Total size
4.4 MB
Largest file
1.2 MB

0 comments

See all