
Khay Đựng Chì Hàn Gridfinity 2x2x12 Có Thể Xếp Chồng
- Downloads
- 4
- Likes
- 2
- Views
- 85
- Remixes
- 0
- Comments
- 0
Files 5 13.1 MB
- gridfinity_solder_holder_2x2x12_1774385915.stlSTL · 567 KB
- gridfinity_solder_holder_unibody_shaft_1774385916.stlSTL · 48.2 KB
- gridfinity_solder_holder_thinner_split_shaft_part1_1774385917.stlSTL · 337.2 KB
- gridfinity_solder_holder_thinner_split_shaft_part2_1774385919.stlSTL · 399.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #261654
- Category
- DIY
- Published
Description
Stackable 2x2x12 Gridfinity Solder Holder Bin. It can carry up to 1kg spools. There are a lot of other holders but most of them did not work well in my case. This model can be closed using a lid (i.e. if you use in a case) or you can stack other bins on top. Nothing will reach into the space of the neighboring bins.
The shaft model is from the original model. There is a standard 14mm shaft (fits most spools) and a split 10mm shaft for smaller spools.
Print in any material. Bin can be printed without supports. The shaft needs some small supports on the bottom.
Variants:
Normal spools (above 14mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_unibody_shaft
Smaller spools (above 10mm diameter):
- 1x gridfinity_solder_holder_2x2x12
- 1x gridfinity_solder_holder_thinner_split_shaft_part1
- 1x gridfinity_solder_holder_thinner_split_shaft_part2
I included the FreeCAD model so you can customize it (i.e. use another gridfinity base bin with label/without magnets or whatever style you like).
Print spec
- Formats
- fcstdstl
- Model files
- 5
- Total size
- 13.1 MB
- Largest file
- 11.7 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-
New -

-

-

-

-


