
Bộ dẫn nhựa phía trên cho Prusa Core One/+
- Downloads
- 235
- Likes
- 100
- Views
- 3,074
- Remixes
- 1
- Comments
- 0
Files 4 615.9 KB
- PrusaCoreOne_ESH_FilamentGuideCover_1774164283.stlSTL · 201.7 KB
- PrusaCoreOne_ESH_FilamentGuideJoin_1774164284.stlSTL · 199.6 KB
- PrusaCoreOne_ESH_FilamentGuideV1_1774164284.stlSTL · 102.6 KB
- PrusaCoreOne_ESH_FilamentGuideV2_1774164285.stlSTL · 111.9 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #261021
- Category
- Máy In 3D
- Published
Description
In my printer setup, filament spools are stored in plastic crates placed on shelves above the printers. This configuration makes it easy to feed filament from the top of my Prusa MK4S printers.
The Prusa Core One printer is originally designed for side-feed filament; this design prevents me from using my filament spools located above.
To overcome this inconvenience, I designed this accessory that allows filament to be fed from the top of the printer.
FILES
- 1 x PrusaCoreOne_ESH_FilamentGuideCover
- 1 x PrusaCoreOne_ESH_FilamentGuideJoin
- Option V1 : 1 x PrusaCoreOne_ESH_FilamentGuideV1 : magnets with gluing
- Option V2 : 1 x PrusaCoreOne_ESH_FilamentGuideV2 : magnets without gluing
ACCESSORIES
- 6 x 20mmx6mmx2mm N52 magnets
- 4 x M3x10mm SHCS
- 1 x PTFE tube (minimum 50mm)
RELEASE
15/04/2025
New PrusaCoreOne_ESH_FilamentGuideJoin.stl file ; no glue necessary for the magnet.
22/05/2025
New PrusaCoreOne_ESH_FilamentGuideV2.stl file ; no glue necessary for the magnet.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 615.9 KB
- Largest file
- 201.7 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-
New -
New -

-

-

-



