Tên lửa mô hình Rocket V3 (hai tầng) - RKD3

Third iteration of model rocket being designed for an undergrad senior aerospace engineering lab project at UCLA.

Requirements/Goals include:

• Two-stage rocket

• Vehicle must use commercial solid motors with a combined total impulse < 100 N-s

• Aim for maximum apogee possible

• Vehicle avionics must include an accelerometer, altimeter, and camera

• Second stage must be ignited electronically based off live accelerometer telemetry

• Vehicle must carry one Grade A egg (2.2 oz) (With successful recovery)

• Reusable

• Only one component can be additively manufactured (i.e. 3D-printed) 

• Total construction cost must be less than $75 (excluding motors and avionics)

• All components must be custom fabricated with exception of the motors and avionics

• The nose cone must be fabricated out of fiberglass composite

• The rocket body must be fabricated out of carbon fiber composite

• Construction should be in accordance with the National Association of Rocket (NAR) Model Rocket Safety Code

*All parts are included in the STL file. Separate into objects in slicer if desired.