
Miếng lọc gia vị gắn chai Ikea Guldfisk
- Downloads
- 3
- Likes
- 0
- Views
- 59
- Remixes
- 0
- Comments
- 0
Files 2 32.8 MB
- strainer_Guldfisk_oblong_1775167454.stlSTL · 15.3 MB
- strainer_Guldfisk_round_1775167456.stlSTL · 17.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #258919
- Category
- Đồ Gia Dụng
- Published
Description
I have designed a small strainer insert for the Ikea Guldfisk bottles (diameter 4cm). The design is tight fit, you just need to push it in the bottle. To remove the insert e.g. a fork is all you need - simply lift the insert by using the designed small hole with one tip of the fork.
One big advantage of the strainer compared to the Citronhaj lid: you still can use the original lid, which is air tight - so your spices stay dry and full of flavor.
Diameter of holes (strainer round): 2,1mm
Recommended print settings (which I used):
-
Material: printed with PETG (don't know if PLA can work, because of the bending)
-
Your printer leveling should be quite good
-
first layer 0.18mm
-
layer height: 0.12mm
-
wall count: 3
-
infill: 100%
-
top/bottom shell thicknes: 4 layer
-
one wall for bottom and top surface
-
orientation: place the flat surface on the printer bed
If you need a strainer with different hole sizes or other hole styles feel free to text me.
Cheers and happy printing!
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 32.8 MB
- Largest file
- 17.4 MB
0 comments
You may also like 12 models
See all-

-
New -

-
New -

-
New -

-

-

-

-

-
New

