Chốt cài openGrid cho POLYmount và PolyDryer

Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps!

Two snaps attach to the upper and lower mounting points, perfectly centering your fancy POLYmount on the openGrid 📐 and allowing easy repositioning as your workspace needs change:

• Simply place the two snaps into your openGrid (check for the correct orientation of these directional snaps)

• ... and then mount the POLYmount 🤩

The design ensures a secure hold and keeps the clean, modular look of openGrid😎.

Related Model:

And here it is - finally - the must have wall mount for your PolyDryer:

Featuring an addictive snap-in mechanism!

Check it out: The  POLYmount  😎

Bonus Material:

Of course you'll find my custom 9x8 openGrid board from the photos with all the CAD resources included in the files section:

• ... with stylish smooth edges for standalone usage

• ... and integrated mounting points optimized for 3.5mm Spax T-Star Plus screws

Take the CAD files and adopt it to the grid size you need!

Assembly and Photos

Printing Instructions

Recommended Settings:

• Layer Height: 0.2mm

• Wall Count: 4 perimeters

• Top/Bottom Layers: 5

• Infill: 40%

• Support: None required

...and ensure your printer is well-calibrated especially for the snap-fit features.

Bill of Materials (BOM)

Hardware Required:

• 2x M4 nuts

• 1x M4x10 screw

• 1x M4x12 screw