Bộ 3D Organizer cho John Company 2nd Ed

John Company - 2nd Edition with Upgraded Coins - 3D Insert and Organizer

Notes: 

• No Supports necessary.

• The Sliding Tops are Currently Set to .01mm variance as that is what worked best for my printer. (If you find that you need a different size, please ask and I will upload as quickly as I can.)  

• All Files that need Multiples have a x# at the end of them.

• EDIT #1: I Discovered that I Didn't like the Original Ships Box, So I suggest Printing the New Top and Bottom!  Also I Updated the Bambu 3mf (Updated again…  I forgot to remove the extra Ships container)

• Edit #2: I have Created Newer Player Pieces Containers/Lids and a New Ships Container/Lid.  Thus I have moved the the previous versions to the Retired Folder (LIST of Old Files:  JC_Player_Pieces_Bottom_x6_Wider_v2, JC_Player_Pieces_Top_x6_v2, JC_Ships_Bottom_v1, and JC_Ships_Top_v1)

• Edit #3: New New Ships Lid. Bad Measurements on Ships_Top_v2.

• Edit #4: New default Orientation for Ships Lid.

• Edit #5: Added a split body version of JC_India_Pieces in the Special Requests Folder. 

• Edit #6: I added Blank version of the Prints with Text on them. I used Times New Roman as my Font and embedded the words that print vertically at .4mm and the words that print flat at .6mm.

With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask.  I am always happy to help.   

Print the following for Organization:

1x JC_India_Pieces_v0

1x JC_Bits_v0

1x JC_Cards_Box1_v0

1x JC_Cards_Box2_v0

2x JC_Component_Tray_x2_v1

1x JC_Enterprises_v0

1x JC_Flags_Bottom_v0

1x JC_Flags_Top_v1

6x JC_Player_PiecesBottomp_Longer_x6_v3

6x JC_Player_Pieces_Top_x6_v3

1x JC_Scenarios_v0

1x JC_Ships_Top_v3.1Orient

1x JC_Ships_Bottom_v2

1x JC_Solo_Bottom_v0

1x JC_Solo_Top_v0

I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

All were Printed at .2mm Layer Height. 20% Cubic Infill 4 Top and 4 Bottom Layers

I used BambuLabs Dark Red Matte PLA and it was a fairly similar red to John Company's Lid (Not Perfect but not too far off.)

Special Request:

• Add Finger Holes to the Player Box.