Ốp tay Ak24 Mlok (10.5 inch) cho Airsoft

Automatkarbin 24 style 10.5" long handguard.

It's quite a bit heavier and stiffer than my previous Sako inspired designs, it's more similar to my Stubby handguards. Unlike in real one, there's no cutout for gasblock adjustment. I'm not sure if I should add it, since it makes printing a lot more difficult. Tell me if you want it.

Use as is or with my upper. 

Collar/gas block is optional, in case you want to use barrel to get more stiffness. 19.1mm is diameter of barrel, it is meant to be used with Cyma cm097 barrel. In case you have different barrel, use step, or 3mf file to cut proper size hole. Cylinder in Collar Cut is 20mm wide, scale it accordingly.

Needed Hardware:
1x M5*30mm hex screw, depending on your washer, you will need to cut it to 28-29mm
1x M5 lock washers
1x M5x8mm socket head. https://www.aliexpress.com/item/1005004281493598.html
2x M4 4-5mm long headless screws for the collar/gasblock

3D printing settings

Print upright or at angle with inbuild supports