Skip to main content
F3D
Cầu cạn tự chế (DIY) cho ray KATO Unitrack, tỉ lệ N-scale 1

7 images

Large file collection Xe Cộ - Máy Móc

Cầu cạn tự chế (DIY) cho ray KATO Unitrack, tỉ lệ N-scale

By Slanjonok

Downloads
200
Likes
24
Views
623

Files 27 12.6 MB

  • DIY-KatoViaduct_S62_1773910969.stlSTL · 197.9 KB
  • DIY-KatoViaduct_S124_1773910970.stlSTL · 268.7 KB
  • DIY-KatoViaduct_S186_1773910971.stlSTL · 336.4 KB
  • DIY-KatoViaduct_S186_raft_1773910972.stlSTL · 343.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

For mobile layouts KATO’s Unitrack is the first and only choice in n-scale and one of the best track systems in general:

https://unitrack.katomodels.com/what_is_uni_track

The system includes viaduct tracks and as I have made a viaduct for my Minitrix unloader, a hade fun to create more viaducts, compatible to KATO’s original viaduct tracks. The advantage of my viaducts is, that it uses simple unitrack rails, just clipped into the viaduct, so you can use the rails with viaducts or as simple rails. Furthermore it’s designed in such way, that below track you can route cables, what is not possible with the original viaduct rails. Finally you can find here viaducts for track geometries, that are not available as originals, for example R216-45, and all the 15deg-curved tracks.

It prints just on plate without supports and 0.4mm nozzle, but with very fine layer height of 0.08mm to build up the overhangs. Larger items are available with built-in rafts to ensure print quality at the outer corners (I use the Bambu X1C, and the heat from the build plate isn't sufficient at the edges, so a raft is necessary to prevent warping). Rafts are easily removed after printing with a sharp knife.

Hope you enjoy these extended possibilities to create viaducts with KATO’s great track system. Happy printing and a lot of fun with your model railway layout!

Please note:
“Kato” and “Unitrack” are trademarks of K.K. Sekisui Kinzoku, Japan. All trademarks are used for reference only. The design presented here is neither supported nor authorised by the before mentioned trademark holder.

Please note the license:
My design is published under the CC BY-NC-SA license, which means that you can freely use this model for any non-commercial purpose and may remix this model freely as long as you provide attribution and share with the same creative commons license. Feel free to contact me if any questions.

Read more Show less

Print spec

Formats
stl
Model files
27
Total size
12.6 MB
Largest file
717.1 KB

0 comments

See all