
Large file collection Giáo Dục
NEW GLENN (NG-1) - Mô hình tên lửa in 3D tỉ lệ 1:200
- Downloads
- 253
- Likes
- 64
- Views
- 1,657
- Remixes
- 0
- Comments
- 0
Files 47 80.8 MB
- Project_New_Glenn_Multiparts_1773905338.3mf3MF · 12.2 MB
- First_Stage_White_1773905340.stlSTL · 85.6 KB
- Interstage_Wood_1773905342.stlSTL · 6.1 MB
- Flap_Silver_x2_1773905343.stlSTL · 60.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #257392
- Category
- Giáo Dục
- Published
- License
- Standard Digital File License
Description
Multicolor
The multicolor version is only available to members of my club.
Description
The New Glenn model is a highly detailed 1:200 scale reproduction of the first orbital rocket of Blue Origin, which made its first flight on January 16, 2025.
The finished model dimensions are approximately 49 cm high and 8 cm wide.
Printing
- There are 38 parts to print**,** the total printing time for the entire model is approximately 9 hours.
Choosing your configuration kit.
There are multiple configuration kits available for this model, depending on your printing and assembly preferences.
Project 3MF
- For the first time I am adding a multiplate 3MF file.
Files (.Zip)
- Kit with Fuzzy Skin (Full Rocket with fuzzy skin texture on the second stage)
- Kit without Fuzzy Skin (Full Rocket without fuzzy skin texture on the second stage)
- Stand Multi Parts (Stand for one color printer)
- NEW GLENN or NG-1 plate
- Stand Multi Color (Stand for Multi color printer)
- NEW GLENN or NG-1 plate
Printing Guide
- For Flap_Silver_x2 parts, you must use the Arachne generation.
- Nameplate AMS
- Nameplate can be printed with a multicolor system, but also with a color(M600) change at layer 14.
Tips
Settings
- For infill, 15% is sufficient for a decorative object, and you can also use "Lightning" infill settings. .
- For the base, it is recommended to print with 3 perimeters to avoid visible infill.
- If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit.
Printing
- For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly.
Post Printing
- You may need to sand the junction areas between the parts for a smoother finish.
- I recommend using glue for better strength and durability.
Print spec
- Formats
- 3mfstlzip
- Model files
- 47
- Total size
- 80.8 MB
- Largest file
- 17.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-


