Miếng lót đầu vặn (Bit Inserts) cho hộp đựng

Tipps and values:

• Filament: PLA recommended (PETG also works)

• Quality (Layer Height): 0,2mm

• Wall Loops: 3

• Infill: 20%

• Infill pattern: Doesn't matter (I used Rectilinear)

• Supports: No! (Do not use supports for all of my Parts!)

• Wall generator: For all Inserts Arachne!!!

Here is a small sketch of what kind of bit fits into the inserts! (Length 25mm, ¼")