Tấm lót chuột máy tính (PC Mouse Pad)

PC Mouse Pad:

This is a simple model with a height of 0.6 mm, which can sometimes come in handy…

There are two versions: 

• 230x230 mm (For Creality bed size).
• 245x205 mm (For Mk4 bed size).

Print Settings: 🖨⚙
Material                    - PLA, PETG
Bed                           - Textured PEI plate*, 3DLack
Flow rate                  - 0.99 (99%)
Layer height             - 0.2 mm (3x layers with a total thickness of 0.6 mm)
Support                    - No
Skirt, Brim               - No, No
Print Speed             - 35-40 mm/s

Benefits of printing: 
- Mesh bed leveling
- Z tilt adjust / Level bed corners.

⚠ *Note: For PC mouse laser optics, you must print on a textured plate, a smooth plate (or top surface) does not work so well.