
Ròng rọc treo tường có tỉ lệ 200%
Remix of Cần trục ren có khóa cho dây thừng nhỏ By DrPrint_226041
- Downloads
- 113
- Likes
- 22
- Views
- 1,048
- Remixes
- 0
- Comments
- 0
Files 5 28.9 MB
- Base_-_Wall_Mount_-_200pct_1765446178.gcodeGCODE · 16.7 MB
- Crank_-_with_Mount_Hole_-_200pct_1765446218.gcodeGCODE · 4.4 MB
- Gear_-_Solid_End_-_200pct_1765446233.gcodeGCODE · 7.3 MB
- Base_-_Wall_Mount_-_200pct_1765446168.3mf3MF · 326.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #25692
- Category
- Mỹ Thuật
- Published
- Tags
Description
This is a modified version of Dr.Print's Ratcheting Thread Winch. I wanted a version I could mount on the wall, so added wall-mount tabs to the base frame. Also made a simple change to the crank to create a pilot hole to screw in to the hub.
Wall mount holes and the crank screw are sized for US #8 screws. I would recommend using washers as well.
To help anchor the crank screw, I printed the gear with 100% infill in the crank-end. This is a modifier in slicing, I've included the GCODE here, but no changes to the model itself.
All other parts can be printed as normal from Dr.Print's model, but be sure to print them at 200% size!
I print the frame in PLA and all other parts in PETG.
Note: I have not tested this to failure. It has consistently held ~13 lbs (6kg) for months. Clearly, DO NOT use for any safety applications.
Print spec
- Formats
- 3mfgcode
- Model files
- 5
- Total size
- 28.9 MB
- Largest file
- 16.7 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-
New -

-

-

-

-

-

-


