Skip to main content
F3D
TPU: Chân giảm rung (flex) cho máy in i3 MK3(s) 1

5 images

Máy In 3D

TPU: Chân giảm rung (flex) cho máy in i3 MK3(s)

By 3Dietrich

Downloads
364
Likes
35
Views
2,375

Files 4 1.8 MB

  • dumpingfeetv4_1773868368.3mf3MF · 14 KB
  • dumpingfeetv4_1773868369.scadSCAD · 2 KB
  • dumpingfeetv4_1773868370.stlSTL · 188.6 KB
  • dumpingfeetv4_1773868371.gcodeGCODE · 1.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I need to damp the printer because my neighbor..
This is version 4 and it is good :)
It holds the printer tight and it still has a little movement.

I added the OpenSCAD file but there is nothing to tweak (well.. $fn and hidden are width and height but it's hidden because this is my best result)

Note: the stl/scad is not complete, but it needs some Slicer settings --> Print Instructions

I used Filament TPU 'medium' (Shore hardness A98) from extrudr.

You need to pay attention to the "vertical shells perimeter:
I printed all with 6 Perimeters but I found the 2 in the back flat after some days. So it needs more, so I printed two with 8 layers (the black ones) and it seems a bit too strong.. but I used it anyway (for the 2 feeds in the more heavy back).

The 3D objects are full bodies, to get the final object you need to set Slicer:
infill = 0%
Horicontal shells, both top and bottom = 0
vertical shells Perimeter = 6 (2x for the front), 7 or 8 (2x for the back)

The reason why I made as block is: it prints more elegant and cleaner and you can deside how thick the walls are.
I added a screeshot of my Slicer preview and the affiliate .3mf (the 6 Perimeter version)

ok, I also added my gcode but I wouldn't recomend to use that (e.g. I still have MK3 without 'S'm that has a different Z hight afaik). If you use Prusa Slicer, the easiest and savest way is to open the .3mf file and render it yourself.

Read more Show less

Print spec

Formats
3mfgcodescadstl
Model files
4
Total size
1.8 MB
Largest file
1.6 MB

0 comments

See all