Đầu nối vòi tưới vườn vào chai nhựa PET (Fusion360)

Certain tasks may require special hose heads and this model aims to ease the creation process in case you don't simply want to buy a new one for, for example, only one usecase. This connector is made to allow you to make your own DIY garden hose head from a regular PET bottle. Sprinklers, new head types, water management systems, … are some examples of what you could use this connector for.

Printing information:

• Print the model on its tip
• No supports are needed
• Use a brim to increase adhesion to the printbed
• As the model will be in contact with water, I recommend using non porous materials like PETG or ASA to print it

Teflon tape on the PET threads can help with their waterproofness. You can use a regular o-ring on the tip as well.

Check out the base models for more information.

Note that, as mentioned by its author, this model resembles (by mischance) a lot a previously existing model. Check it out here for an alternative: https://www.printables.com/model/153957-garden-hose-gardena-to-pet-bottle-adapter.