The Photon Lite - Bản làm lại Wii Zapper

I really liked @FuseFoxDesign 's design for a Wii Zapper/Lightgun, but there were a handful of things that I wanted to change for quality-of-life purposes:

1. The original grip for the Photon is extremely large, and gets uncomfortable to hold after a while, so I slimmed the grip down significantly.
2. The original grip/body connects to the bottom portion of the trigger guard with a pointy and jutted out bit that can be painful if your hand presses into it (which happens often when your finger is on the trigger), so I thinned/smoothed that portion out while modifying the grip.
3. The front sight doubles as a way to secure the Wiimote in place, but is a bit too far forward, so I moved it back by about 2.5mm; this partially covers the power button on the Wiimote, but it is still accessible, and the Wiimote is more secure now.
4. The trigger slide will often move up and down since there is a gap between it and the Wiimote, so I added a small section above where the trigger spring would go to minimize that issue.

The only files that have been modified are the gun body and the grip; the front sight, the trigger slide, and the trigger spring are the same as the original V2 version's. (Also ignore the slight line towards the front of the body in the images, the print head knocked a support over and pulled the body off the print bed at 90% and I didn't want to waste the filament so I just re-printed the remaining 10% and glued it together, the actual model is totally fine)

The tolerances for the parts should all be identical to the original model's, but let me know if there are any issues with the model that I've missed or if the tolerances need adjustments!