
CORE One HEPA & Charcoal Filter - Bộ lọc khí thải
- Downloads
- 921
- Likes
- 501
- Views
- 11,266
- Remixes
- 1
- Comments
- 0
Files 4 427.3 KB
- COREOne_Filter_1773812072.3mf3MF · 78.1 KB
- COREOne_Filter_1773812072.stepSTEP · 110.5 KB
- COREOne_Filter-Modifier_1773812073.stlSTL · 1.4 KB
- COREOne_Filter_1773812074.stlSTL · 237.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #256120
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
A simple screw-mounted air filter for the CORE One. It will require higher fan speeds during PLA printing due to added resistance. I manually increase the speed to 65%, which results in ~32°C in the chamber. I strongly advise always turning on the fans a bit (>25%), even when printing ABS/PC, to create a negative pressure environment within the printer.
Load the 3mf into PrusaSlicer because it already includes the mesh modifier for the back vent.
STP is included for your remixing enjoyment.
BOM:
- 4x M3 x 40 mm cap head screws: https://cnckitchen.store/products/schraube?variant=47867092074831
- 6 x 3 mm (1/4" x 1/8") foam strip (I got a 12 x 3 mm one and halfed it): https://geni.us/kfEsQq1 (aff)
- Vacuum Cleaner HEPA filter (126 x 47 mm): https://geni.us/y2mA (aff)
- Proper Filter Charcoal: e.g. Nevermore https://github.com/nevermore3d/Reseller
Installation:
- Add foam strip
- Add charcoal
- Install HEPA filter
- Screw to the printer
Print spec
- Formats
- 3mfstepstl
- Model files
- 4
- Total size
- 427.3 KB
- Largest file
- 237.3 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -
New -

-

-

-

-

-



