Nam châm tủ lạnh hình mấu bám leo núi tốc độ (Parametric)

Turn your fridge into a tiny IFSC speed climbing wall.

The model includes a magnet hole on the back.
You will need a small amount of glue to secure the magnet in place.

This model is parametric, you can change it to fit different magnet sizes and scale the hold up or down.

What can you change?

Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.

Parameters

Parameter

Default Value

Description

scale

0.3

Hold scale

magnet_diameter

10.2 mm

The magnet diameter (add a bit of clearance, usually 0.2 mmm, for an easier fit)

magnet_height

3 mm

The magnet thickness

Printing recommandations

• Use 0.08mm or 0.12mm layer height for best results, as the model includes many rounded surfaces and gentle slopes.

• Enable the Fuzzy Skin setting in your slicer for a more realistic hold texture.

  Recommanded settings:

  • Fuzzy Skin Mode: Contour

  • Fuzzy Skin Point Distance: 0.4mm

  • Fuzzy Skin Thickness: 0.2mm

Display recommandations

• You will need 20 holds if you want to recreate the full IFSC official speed route.

• Please do not tilt your fridge to reproduce the 5° overhang, even if it's tempting.