
Bình chứa Prusament với nắp vặn cho lõi cuộn giấy
- Downloads
- 1,513
- Likes
- 475
- Views
- 10,009
- Remixes
- 3
- Comments
- 169
Files 6 24.3 MB
- prusament-screw-top-container-v2-lid_015mm_pla_1766510326.gcodeGCODE · 3.1 MB
- prusament-screw-top-container-v2-bottom_015mm_p_1766510327.gcodeGCODE · 8.8 MB
- prusament-screw-top-container-v2-top_015mm_pla_1766510328.gcodeGCODE · 10.8 MB
- prusament-screw-top-container-v2-bottom_1766510323.stlSTL · 638.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 3
Hộp Đựng Vệ Sinh Dụng Cụ Cắt Gọt (Cricut) Từ Lõi PrusamentByHappy_Twins_7286 · 12/15/2025
Bình chứa cuộn Prusa dành cho người không có cuộn rỗngByHobson3D · 03/21/2025
Thùng rác để bàn cải tiến cho Prusament Screw-Top Container v2ByKlaus · 03/18/2025
Details
- Model ID
- #25522
- Category
- Đồ Gia Dụng
- Published
Description
These are parts that you can use to convert a Prusament spool cardboard core into a container.
Insert the top and bottom parts from both sides into a spool core. The "teeth" on the parts align with the teeth on the original spool sides. First, try to align the printed parts with the grooves that were left after spool parts. If there is not enough friction to hold the part in place — insert it in a way where the teeth don't align with the grooves.
You can read a story about this design on TerpuhLabs.
The first version that I made was a remix of the CONTAINERS - PRUSAMENT SPOOL - reuse idea by Dominik Císař. I didn't like how the first version performed so I redesigned the project from scratch.
Print instructions
0.2 layer height will work, but smaller layer heights result in better screwing experience.
Print spec
- Formats
- gcodestl
- Model files
- 6
- Total size
- 24.3 MB
- Largest file
- 10.8 MB
169 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-


