
Còi Kẹp Đa Năng (Clip-on Whistle)
- Downloads
- 14
- Likes
- 2
- Views
- 104
- Remixes
- 0
- Comments
- 0
Files 1 77.6 KB
- Clip_Whistle_Straight_1773758944.stlSTL · 77.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #254913
- Category
- Thể Thao & Ngoài Trời
- Published
Description
This novel emergency whistle is integrated with a clip. It easily clips on & off your backpack or keychain, without fiddling with the key ring or a separate clip.
There is a small (0.2 mm) gap in between the two sides that allow the clip whistle to slightly open for the clip action; the small gap doesn't affect the whistle sound or loudness.
Details
-
It is loud, with two tones around 2.6 kHz for optimal range
-
With a rounded, comfortable mouthpiece
-
2.2 gram / 0.08 ounce
Printing instructions
-
Specifically designed for 0.4 mm nozzle
-
Recommended 0.2 mm layer height
-
No supports required
-
PLA works great, many materials should work
-
About 6 minutes print time
-
It might require a light twist or the edge of a bed scraper to break the sides apart.
Alternate
For a similar clip whistle in a key shape with a larger hole see:
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 77.6 KB
- Largest file
- 77.6 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-

