Giá Treo Tường Cho Máy CPAP AirSense 10
Remix of Giá treo tường cho máy trợ thở CPAP AirSense 11 By SesameMakes
- Downloads
- 102
- Likes
- 16
- Views
- 761
- Remixes
- 0
- Comments
- 0
Files 1 608.3 KB
- Copy_of_Airsense_10_wall_mount_1773639863.stlSTL · 608.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #252490
- Category
- Sức Khỏe
- Published
Description
To accommodate the Airsense 10, I needed to extend some dimensions and make some cutouts. I used a 30% gyroid infill overall, but increased it to 50% in the vertical section that may have higher stress. Probably overkill. 30% should be plenty.
Despite doing 4 test fit prints before my final print, I found a couple of cutouts that needed to be made a slightly larger, so made those final tweaks before uploading. If you have any suggestions for further improvement, please leave a comment.
I used a standard PLA. No supports needed.
6/22/25 Brought the shelves about 1cm closer together to be more compact. So there won't be a big gap between the CPAP and the upper shelf as in the photo of my original print of this.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 608.3 KB
- Largest file
- 608.3 KB

