
Mô hình in 3D Volvo C303 - Tỷ lệ 1:32
- Downloads
- 116
- Likes
- 37
- Views
- 750
- Remixes
- 0
- Comments
- 0
Files 16 1.2 MB
- Axle_1773635903.stlSTL · 100.9 KB
- Cab_1773635904.stlSTL · 158.4 KB
- Chassis_1773635906.stlSTL · 54.3 KB
- Floor_1773635907.stlSTL · 224.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #252429
- Category
- Xe Cộ - Máy Móc
- Published
Description
Introduction:
This is a 3D printable scale model of an off-road van inspired by the legendary Volvo C303 – a military-grade workhorse known for its rugged design and go-anywhere attitude. Designed with clean lines and simple assembly in mind, this model is perfect for display, diorama builds, or collectors of vintage and military vehicles.
Parts to Print:
Print the parts as per the list. Use recommended colors for best results.
Part Name
Color
Quantity
Axle
Black
2
Cab
1
Chassis
Black
1
Floor
Black
1
Grill
Black
1
Head Light
White
2
Rear View Mirrors R
Black
1
Rear View Mirrors L
Black
1
Rim/Rim for TPE Tire
5
Roof
1
Spare Wheel Holder
Black
1
Steering Wheel
Black
1
Tail Light
Red
2
Tire/TPE Tire
Black
5
Print Process:
Position the parts in slicing software with orientations shown in the following images. Correct orientation is important for printing without additional support.
Color Parts:
Black Parts:
Print Settings:
The model is designed for printing with a 0.4 mm nozzle and requires no additional supports. Use the printer-specific settings for the best quality prints.
Layer Height: 0.2 mm
Infill: 15–20% is sufficient for most parts
Supports: Not required. Orient the parts as shown in the images above.
Material: PLA recommended; ABS or PETG also compatible
Bed Adhesion: Brim optional for Cab and Roof.
Post-Processing:
The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. You may require the following tools as per preference and availability:
- Cutter or Knife
- Sandpaper or Small Files
- Adhesive (SuperGlue)
Assembly Instructions:
Watch the following video instructions for the model assembly. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. In case any joint feels loose, use adhesive to fix the joint.
Print spec
- Formats
- stl
- Model files
- 16
- Total size
- 1.2 MB
- Largest file
- 224.3 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-


