
Bộ phận in cho MMU3 Enclosed (dành cho Core One)
- Downloads
- 785
- Likes
- 181
- Views
- 7,113
- Remixes
- 2
- Comments
- 0
Files 25 17.2 MB
- idler-lever-A-R2_1773600909.stlSTL · 313.4 KB
- idler-lever-B-R2_1773600910.stlSTL · 319 KB
- idler-nut-fs-R2_1773600912.stlSTL · 141.7 KB
- swivel-A-R2_1773600912.stlSTL · 126.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Ngàm gắn bộ đệm MMU3 bên trái cho Prusa CORE One/CORE One+ByLukasStanek_2014330 · 04/04/2026
Ngàm gắn phía trái cho Buffer MMU3 trên Prusa CORE One/+Byice987 · 03/16/2026
Details
- Model ID
- #251932
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v2.0
Description
All printable parts to convert your existing Original Prusa MMU3 (for MK4S) to Original Prusa MMU3 Enclosed (for Core One). Before you start printing please read the instructions carefully! You need to source additional parts listed in the table below yourself or purchase them from Prusa.
Print instructions:
Download the latest PrusaSlicer and use the following settings*:
- Print settings: 0.20mm STRUCTUAL
- Filament: PETG (tested on Prusament)
- 15% Grid infill
* Note that print settings are recommended, but you can experiment with your own.
The prints were tested on the Prusa CORE One
Required fasteners and parts:
M3x10rT screw
18 pcs
M3nN nut
2 pcs
Magnet 20x6x2
12 pcs
PTFE 4x2.5x390mm**
1 pc
O ring (2.8x1.2 NBR70)
2 pcs
PTFE 4mm Collet
1 pc
MMU Holder for Core One***
1 pc
MMU Top Cover for Core One***
1 pc
MMU Vent Cover for Core One***
1 pc
**Before using the MMU3, set the correct PTFE tube length (390 mm) in the printer menu under Settings → Hardware → MMU → Front PTFE Length. This setting is available in firmware version 6.3.3.
***Available as a conversion kit in our e-shop.
Also, when purchasing an Enclosed version from our e-shop, you will receive all the necessary parts already printed. The released printed parts are meant to be used as spares.
Required fasteners and parts can be ordered from our e-shop.
Required tools:
- T10 Allen key
Please see the manual for assembly instructions.
Print spec
- Formats
- 3mfbgcodestl
- Model files
- 25
- Total size
- 17.2 MB
- Largest file
- 7.6 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-

