Giày Tora barefoot in 3D

size chart:

---

Filament: Recreus 82A, 3Dfils 85A

Use TPU 95A first

---

Orca Slicer / Bambu Studio settings:

Global

- layer height: 0.2mm
- line width sparse infill: 0.6mm
- wall loops: 0
- top shell layers: 0
- bottom shell layers: 0
- sparse infill density: 62%
- Infill pattern: Grid
- Infill anchor: 1000 (unlimited)
- Max infill anchor: 1000 (unlimited)
- Infill direction: 45°
- Detect narrow internal solid infill: no
- Speed sparse infill: 18 mm/s
- Enable support: no
- Reduce infill retraction: no

Cube modifier (256x256x0.9mm around height 1.5mm to make a 3 layers platform):

- Infill density: 60%
- Infill pattern: Rectilinear
- Infill direction: 0°

Filament:

- Temperature: 215 °C (95A), 220°C (85A) 
- Retraction: 1.8mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 4.8 mm^3/s

---

Prusa Slicer settings:

- layer height: 0.2mm
- perimeters: 0
- solid layers top: 0
- solid layers bottom: 0
- ensure vertical 
- fill density: 62%
- fill pattern: grid
- length of the infill anchor: 1000 (unlimited)
- maximum length of the infill anchor: 1000 (unlimited)
- supports: no
- speed: 18mm/s
- infill extrusion width: 0.6mm
- fan: off

---

Cura settings:

- place the model diagonally (45°)
- layer height: 0.3mm
- infill line width: 0.65 (or 0.4 with 162% infill flow)
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 2mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- randomize infill start: yes
- infill overlap: 0mm
- infill speed: 18mm/s
- combing mode: off
- z hop: 1.2mm

settings modifier (300x300x1.1mm solid, placed around Z = 1.4mm, to make an internal flat top 3 layers platform to place the feet)

- infill pattern: zigzag
- infill line distance: 1mm
- infill line direction: [0,90]

---

Website: riverfamily.art