Bộ nắp bịt đầu ống - 15-110 mm

Use this generator if you need different variant:
https://michalmietlinski.github.io/hole-generator/

Additional options in CLI tool:
https://github.com/michalmietlinski/hole-generator

Pipe end caps — circular caps that slip over the pipe end. Inner diameter is the hole size (choose exact pipe size, +1 mm, or +2 mm for fit). Top has the same diameter as the hole (no wider rim). Cap thickness 2 mm, inlet depth 15 mm. Full set of STLs for common nominal pipe sizes.

Sizes (nominal pipe, mm):

15, 20, 25, 32, 40, 50, 63, 75, 90, 110

Variants per size:

• Exact (inner = pipe)

• +1 mm (inner = pipe + 1 mm)

• +2 mm (inner = pipe + 2 mm

See also: