Voron 2.4 & Trident Tophat 35mm

(16.02.2024) Outsourcing the 66mm Version to it's Original repository

(01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD)
 → There were to much reports of the TopHat not sitting tight enough against the foam/frame
(05.10.2023) Reduced the amount of magnets needed and released 66mm Base Model
(04.09.2023) Updated to newer Version slightly incresed thickness, to minimize artifacts

This Tophat grant extra travel for Z so your bowden and possible Umbilical/Can Wires don't hit the top panel and get squeezed.
 

Right now made for Standard 3mm Panels. If asked, i will try to do for thicker Panels
 

Disclaimer: This Modell likely needs you to calibrate shrinkage before.

BOM (35mm):

Printed Parts: 

• 2 (and 2 mirrored) Panels of each type (look for your desired size)
• 4 Connector Plates
• 4 Cover Plates
• 8 Magnet Inlays
• 8x  | Unhammer Nuts

Hardware:

• 20x Heatset Inserts
•   4x | M3x6
•   8x | M3x8
• 4x | 6x3 Round Neodym Magnets (for the Covers)

Magnet Mount reused from: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts He did a really great job.