
Nắp bình 1 Gallon chuẩn 38DBJ siêu bền
- Downloads
- 2
- Likes
- 1
- Views
- 82
- Remixes
- 0
- Comments
- 0
Files 5 4.4 MB
- 38DBJ_CAP_1773493865.f3dF3D · 295.3 KB
- 38DBJ_CAP_1773493866.stlSTL · 901.4 KB
- 38DBJ_CAP_SCREW_ON_ADAPTER_1773493867.f3dF3D · 737.4 KB
- 38DBJ_CAP_SCREW_ON_ADAPTER_10mm_HOSE_1773493868.stlSTL · 933.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #249426
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Public Domain
Description
A sturdy, reusable replacement cap for standard 1‑gallon water and milk jugs
This model is a functional, easy‑to‑print cap designed around the 38DBJ neck standard, commonly used on 1‑gallon water and milk containers in the US. It’s a great upgrade if you’ve lost the original cap, want a more durable reusable option, or need a cap for DIY projects that repurpose gallon jugs.
There is also a variation that has a 10m hose adapter and a vent hole. I have used these with a maple syrup tapping kit.
The design includes:
-
Accurate 38DBJ thread geometry for a snug, leak‑resistant fit
-
Thick walls and reinforced top for long‑term durability
-
Easy‑grip exterior for opening/closing with wet hands
-
Print‑friendly orientation with no supports required
🖨 Printing Instructions
Recommended Settings
-
Perimeters: At least 4 perimeters (important for thread strength and leak resistance)
-
Layer Height: 0.16–0.20 mm
-
Top/Bottom Layers: 4–6
-
Supports: None
Material Recommendations
-
PETG: Best balance of strength, flexibility, and chemical resistance
-
PP or HDPE (if your printer supports them): Closest to original jug caps
-
PLA: Works, but may deform with heat or stress — not ideal for long‑term use
Print Orientation
-
Print upright, with the open threaded side facing up.
This ensures:-
Clean, accurate threads
-
Stronger layer bonding around the cap walls
-
No supports inside the thread area
-
Fusion 360 Model
The Fusion 360 source file is included so you can fully customize the cap to your needs. You can adjust wall thickness, tweak the grip pattern, modify the thread pitch, seal, etc. This version uses three starter threads.
Print spec
- Formats
- f3dstl
- Model files
- 5
- Total size
- 4.4 MB
- Largest file
- 1.6 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-
New -

-

-

-
New -

-


