Mô hình Hornet 13 linh hoạt

Poseable hornet model. 

Assembly is mostly the same as Carbon 13 - Type F.

I made a simple dress out of an old t-shirt. I could make a 3d printed one, but the poseability would suffer. Also sculpting fabric is really hard.

It is recommended to print a dummy/carbon 13 stand, as without it, hornet has basically no chance to stand upright. I used soozafone's Dummy13 stand, but I recommend using a locking design

The model pictured used PLA for the body parts (+needle) and ABS for the joints. I recommend that you do the same. The joint parts are so small that you probably don't need an enclosure

The Head and NeedleTop require supports. Head must be printed with 5% infill or less. If its too heavy, it'll be too floppy to pose.

The two halves of needle friction fit together. Superglue (or any adhesive) is required to fix the eye inserts in place. 

Currently working on runners, a template for the dress, and general refinements.