Máy In 3D
Ngàm gắn Camera USB cho Voron 0
- Downloads
- 193
- Likes
- 29
- Views
- 1,288
- Remixes
- 0
- Comments
- 0
Files 1 26.9 KB
- USB_Camera_Mount_V0_1773404247.stlSTL · 26.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #247314
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
- This model is optimized to be printed without supports!
- Use ABS (maybe PETG if you dont plan on enclosing your V0)
- I used a Ov3660 USB Camera but there are newer versions out there
- My camera has a 64° FOV, a 110° version of the camera works as well but the angle is not optimized for it.
- Make sure to orient the camera with the port on the bottom or the x-beam will ram into the cable and break out the connector on the camera module
- You need 2x M2x6 and 1x M3x6 or M3x8
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 26.9 KB
- Largest file
- 26.9 KB