
Giá đỡ ổ cắm điện cho Voron 2.4 350
Remix of Chốt cửa 2020 Extrusion cho bản Remix Voron Fridge Door By ServerGuy66_1108916
- Downloads
- 2
- Likes
- 1
- Views
- 161
- Remixes
- 0
- Comments
- 0
Files 2 235.9 KB
- Power_Strip_Mount_R_1773352241.stlSTL · 118 KB
- Power_Strip_Mount_L_1773352242.stlSTL · 118 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #246437
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
With the addition of the Enclosed Armored Box Turtle, I was having an issue with cable and power distribution management. After recently acquiring a power strip off Amazon (Linked below), I started looking for ways to attach one to the back of the Voron on the 2020 extrusions. My initial thought was to design the mount to attach to the side extrusions but realized that having them hang from the top extrusion would be a simpler solution.
I used TinkerCAD to add to the door latch bracket design and this is what I came up with. While it may not be the most visually attractive solution, it appears to be functional. I printed it in ASA with 4/5/5 40% Grid settings, which may be slightly over engineered.
This is a work in progress as I get better at designing. Feel free to provide feedback on improvements.
Hardware needed:
4 M-3x5x4 heat inserts
4 M3x8 SHMC
4 M3x12 SHMC or BHMC
Your choice of 4 M3 T-Nuts or Roll in nuts
Power strip:
https://www.amazon.com/dp/B0CCL2FF5T?ref=fed_asin_title
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 235.9 KB
- Largest file
- 118 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


