Nắp thông gió MAGNETIC Core ONE sử dụng nam châm

Please download the flaps from the original model.

This remix uses magnets instead of screws to mount the vent flaps. The model is compatible with following round magnets. If you need another magnet please let me know.

• 5x2, 5x3

• 6x2, 6x3

• 8x2, 8x3

• 10x2,10x3

To print this model please use a 0.2mm layer height. Use the model which fits your magnet size. The holes are 0.2mm bigger than the magnets to make a snug fit. 

Insert a pause in the slicer at following heights to insert the magnets:

• 2mm magnet: layer 13 -> 2.6mm

• 3mm magnet: layer 18 -> 3.6mm