Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K
Máy In 3D
Vỏ bảo vệ camera ESP32 cho máy in Prusa Core One
- Downloads
- 532
- Likes
- 163
- Views
- 3,977
- Remixes
- 1
- Comments
- 0
Files 4 595.6 KB
- PrusaCoreOne_Kamera_unten_V3_1773320800.stlSTL · 325.1 KB
- PrusaCoreOne_Kamera_oben_V3_1773320801.stlSTL · 130.6 KB
- PrusaCoreOne_Kamera_B_gel_1773320802.stlSTL · 69.8 KB
- PrusaCoreOne_Kamera_B_gel_nur_Modul_1773320803.stlSTL · 70.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #245935
- Category
- Máy In 3D
- Published
Description
A housing for the ESP32 Cam for the Core One.
https://www.amazon.de/gp/aw/d/B097Y93P8D?psc=1&ref=ppx_pop_mob_b_asin_title
You need 3 magnets 8x3 and 5 M3x6 screws.
The housing can be printed without support.
I printed my quick prototype with 0.20 in pla.
But I would recommend at least PETG, better ASA or ABS.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 595.6 KB
- Largest file
- 325.1 KB
0 comments
You may also like 12 models
See all-
-
CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K -
NewSelf-closing tweezers V3
BydalleLikes0Downloads147 -
Prusa Core One – INDX Spoolholder Caps
Bypeter-van-der-waalLikes0Downloads256 -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads543 -
INDX Rear Filament Sensors Holder V2
BykingnothingLikes0Downloads181 -
Cảm biến sợi nhựa CoreOne INDX với khớp nối PTFE | M5 M6 M10
ByfilamentalistLikes71Downloads111 -
Phụ kiện đinh gai 3D cho giày Crocs - Tự tay tạo phong cách cá tính
ByHanzo3dLikes155Downloads415 -
INDX Top Cover Hole Plug Grommet
Byp3rr1ff3ryLikes0Downloads149 -
Snapmaker U1 Poop Deflector
BydarienLikes0Downloads1K -
Dụng cụ hỗ trợ rút trục X (X-axis Rod Puller)
ByGeek5DLikes147Downloads488 -
Dụng cụ cạo bàn in / ron (Gasket Scraper) nhỏ gọn
ByBrokentooth_designsLikes23Downloads410
